Reeves Self Propelled Power Broom
|
5.5 HP Honda with 6 to 1 gear reduction |
|
18" diameter x 36" long poly. or poly/wire brush |
|
Sweeps left, right or straight ahead |
|
Deadman type controls |
|
Chain driven power drive |
|
Belt driven brush |
|
Single hand control |
|
Anti-reverse device |
|
Metal brush cover |
|
Two 4.10 x 3.50 x 4" pneumatic tires |
|
Weight 300 lbs. |
Little Tex
|
5.5 HP Honda |
|
Also available with Briggs & Stratton® Engine |
|
8" solid steel flywheel |
|
Two carbide tip cutting blades |
|
Inset rear wheel for close up work |
|
Single lever disengaging rod |
|
Hand adjustable cutting height |
|
Pulley enclosed in safety shroud |
|
Easy to use throttle control |
|
8" cutting path |
|
8 x 2.50" semi-pneu. tires front and rear for easy maneuverability |
|
Lifting bar for handling ease |
|
Weight 175 lbs. |
Big Tex
|
5.5 HP Honda |
|
Also available with Briggs & Stratton® Engine |
|
12" solid steel flywheel |
|
Four carbide tip cutting blades |
|
Inset rear wheel for close up work |
|
Single lever disengaging rod |
|
Hand adjustable cutting height |
|
Pulley enclosed in safety shroud |
|
Easy to use throttle control |
|
12" cutting path |
|
8 x 2.50" semi-pneu. tires front and rear for easy maneuverability |
|
Lifting bar for handling ease |
|
Weight 200 lbs |
Super Tex
| 9 HP Briggs & Stratton® Engine |
|
OR Order A "SUPER SPUDDER" with 11 Hp Honda |
|
12" solid steel flywheel |
|
Four carbide tip cutting blades |
|
Double belts and pulleys for extra power |
|
Inset rear wheel for close up work |
|
Single lever disengaging rod |
|
Hand adjustable cutting height |
|
Pulley enclosed in safety shroud |
|
12" cutting path |
|
8 x 2.50" semi-pneu. tires front and rear for easy maneuverability |
|
Lifting bar for handling ease |
|
Weight 225 lbs. |
Blade Runner Self Propelled Hydraulic
Double Cutter with Light
|
20 HP Kohler with Electric Start |
|
Fully hydraulic drive allows for precise cutting through the toughest material |
|
NEW DESIGN WITH... Easy access belt cover, Quick change belt system, Sliding rail belt tensioning for the blade shaft, Extra long operator handles for easy maneuvering, and Dash board control panel making cutting height adjustment, key switch, choke, and throttle easy to reach |
|
Standard with a Hi Rise Air Intake for Cleaner Engine Cooling |
|
Ships with 2 standard 12" carbide tip blades, 14" blades available |
|
Adjustable cutting depth to 3 1/2" (using 12" blade) with Floating Blade Covers |
|
Two rear 4.10" X 3.5" X 6" foam filled tires |
|
Two front 10 x 2.75" semi-pneu. tires |
|
Control forward and reverse drive motion with one simple handle |
|
Handy throttle control |
|
Weight 430 lbs. |
|
Cuts are 24" inches apart |
Double Blade Roof Cutter
|
Standard with 13 HP Honda Engine |
|
Available with 13 HP Honda with Electric Start |
|
Available with 20 HP Kohler with Electric Start |
|
Ships with 2 standard 12" carbide tip blades, 14" blades available |
|
Standard with a Hi Rise Air Intake for Cleaner Engine Cooling |
|
Adjustable cutting depth to 3 1/2" (using 12" blade) with Floating Blade Covers |
|
Two rear 12 x 3" semi pneu. tires |
|
Two front 10 x 2.75" semi-pneu. tires |
|
Handy throttle control |
|
Weight 285 lbs. |
|
Cuts are 24" inches apart |
Heavy Duty Single Blade Roof Cutter
| |
|
Available with 11 HP Honda with Electric Start |
|
Standard with a Hi Rise Air Intake for Cleaner Engine Cooling |
|
Ships with standard 12" carbide tip blade, 14" blade available |
|
Heavy duty body w/1 1/4" shaft & bearings. |
|
Two rear 12 x 3" semi pneu. tires |
|
Front 10 x 2.75" semi-pneu. tires |
|
Adjustable cutting depth to 3 1/2" (using 12" blade) with Floating Blade Cover |
|
Weight 250 lbs. |
Reeves Single Blade Roof Cutter
|
Standard with a 9 HP Honda Engine |
|
Standard with a Hi Rise Air Intake for Cleaner Engine Cooling |
|
Ships with standard 12" carbide tip blade, 14" blade available |
|
Heavy duty body w/1" shaft & bearings. |
|
Two rear 12 x 3" semi pneu. tires |
|
Front 10 x 2.75" semi-pneu. tires |
|
Adjustable cutting depth to 3 1/2" (using 12" blade) with Floating Blade Cover |
|
Weight 230 lbs. |
Mighty Mini Roof Saw
|
5.5 HP Honda Engine |
|
Uses a standard 12" carbide tip blade |
|
Adjustable cutting depth to 3 1/2" with adjustable blade cover |
|
Heavy duty body w/1" shaft & bearings. |
|
One front and two rear 8 x 2.50" semi pneu. tires |
|
Height Clearance 17 Inches |
|
Adjustable handle lets you reach under a/c units and other machinery! |
|
Weight 145 lbs. |
Reeves Twister
|
11 hp. Honda with oil alert |
|
Optional 11 hp. Honda with electric starter |
|
Rugged heavy duty hydraulic drive system for reliable and precise control |
|
A True 'Hydraulic' drive. Don't pay more for unnecessary horsepower! This hydraulic system will out perform and out last machines with bigger engines and lawnmower type hydrostatic drives. |
|
3.7 Gal. hydraulic reservoir (14 liters) for cooler operating temperatures and extended equipment life |
|
Easy to operate forward and reverse and blade actuator controls |
|
New easy-to-operate "Twist Grip" for forward and reverse drive |
|
Reciprocating (front to back motion) 21" wide hardened tear-off blade with single handle control |
|
Dead-man engine cut off safety switch |
|
Easy to operate parking disk brake |
|
Easy blade change (only 4 bolts) |
|
Two position blade-unbolt blade and flip over for a different angle |
|
Drive wheels -16 x 5" solid rubber flat surface Chevron Tread tires for positive traction |
|
Length-90", width 33", height-44" |
|
Weight 600 lbs. |
Mini Rock Buster
When The Job Is Small
Use This Mini Version Of The RockBuster
Features :
A
Must For Gravel Stops
Flashing
Repairs
Spot
Repairs
Will
Bust Rock Without Tearing Felt
Removable
Handles For Storage Or Shipment
Specifications
:
5.5
Honda Engine Standard
4-6x2
Mold on Wheels With 3/4" Roller Bearings
*NEW*
Check
Out The Rock Buster
And
Watch The Video
Click
Here!
With over 800 units sold by Superior - The best in the industry
Double Blade Roof Cutter
Features
> Smooth, variable speed hydrostatic drive for forward and reverse
> Large capacity remote location filtered air intake
> 25" cut width fits down the trash chute
> Uses 12" or 14" blades, with adjustable cutting depth
> Protected front headlight
> Low oil alert and maintenance meter
> Well balanced for less user fatigue
Optional water injection system
Reduces tear off dust
Fully self contained unit
12 volt electric pump
5 gallon water tank
Includes flow control valve
Unit can be removed in less than 5 minutes
Excellent for pitch tearoffs
Shipping weight: 20 lbs
Specifications
20 hp Honda with electric start
2 - 530 x 450 x 6 foam filled tires on drive wheels
2 - 10 x 275 front wheels
2 - 5" polyolefin blade guard wheels
1 1/2" shaft with heavy duty bearings
Shipping weight: 540 lbs
Roof Cutter
Features
> Controls and engine protected by frame
> High quality shaft bearings
> Quick change belts ( no need to remove shaft )
> Quick change blades ( flip up blade guard )
> Uses 12" or 14" blades
> Low profile self adjusting blade guard
> 12" carbide tip blade included
> Constructed of 12 ga tubing
Specifications
2 - 12 x 3 rear wheels with 3/4" roller bearing
1 - 10 x 275 front wheel with 5/8" roller bearing
1 - 6" blade guard wheel
2 - BX-38 belts
Engine Options
9 hp Honda with oil alert shipping weight: 224 lbs
11 hp Honda with oil alert shipping weight: 240 lbs
13 hp Honda with oil alert shipping weight: 240 lbs
9 hp Vanguard with oil alert shipping weight: 225 lbs
Mini Cutter
Features
> Perfect for small jobs or detail work
> Dependable rugged machine
> Comfortable and easy to operate
> Handle folds to go under things
> Fold handle over engine for easy transportation
Specifications
5.5 hp Honda with cyclone air cleaner and oil alert
2- 10 x 270 rear wheels with 5/8" roller bearing
1 - 6 x 2 molded rubber on cast iron blade guard wheel
Handle extends from 40" to 55" and folds to 18" high unit
Shipping weight: 161 lbs
Carbide Blades
Features
> Full 1/4" x 1/4" premium carbide tip fits all makes of roof cutters
> Tip angle provides the best wear and power efficiency
Specifications
12" hex blade shipping weight: 4 lbs
12" dual blade shipping weight: 2 lbs
14" dual blade shipping weight: 2 lbs
12" quad blade shipping weight 3 lbs
Panther Paws Tearoff
Features
> Hydrostatic drive for smooth variable forward and reverse
> Oscillating blade
> Will handle any tear off from fully mopped to mechanically fastened
> Will handle concrete to metal and wooden decks
Specifications
13 hp Honda engine with electric start
2 - 16 x 5 chevron tread hard rubber tires
18" straight blade is standard
Serrated and tined blades are available as options
Shipping weight: 545 lbs
Hydrostatic Broom
Features
> Choose from 42" or 52" broom
> Hydrostatic drive for smooth variable forward and reverse
> Hydraulic powered brush
> Low maintenance, only two belts
> Operator controlled left, right and straight sweeping
> Hydraulic release for cold weather starting
Specifications
11 hp Honda engine
2 - 6 x 2 rubber molded on cast iron broom caster wheels
2 - 530 x 6 drive wheels
42" replacement brush set, poly, steel or poly/steel mix
52" replacement brush set. poly, steel or poly/steel mix
42" shipping weight: 545 lbs
52" shipping weight: 561 lbs
Wheeled Tearoff Bar
Features
> Hardened steel blade
> Roll under roof material and pry down to remove
Specifications
1 1/4" tubular steel frame
2 - 6 x 2 mold on wheels
Optional tined blade
Shipping weight: 48 lbs |
